Historias de éxito

“The presses are very user friendly. They are all manufactured similarly, so from that standpoint, once the operator knows one Minster, it’s very easy for them to switch to another.”

“When Jim put the Minster presses in here, I went from fighting fires all day to the Maytag Repairman. Now I just sit back and take it easy.”

“The way the press was constructed is very helpful for us. It allows us to get in there and work on the tooling – from one end of the tool to the other.”

“We could have bought two of a different brand, but it just wasn’t the same press – little things like every 250 hours the clutch needs to be replaced.”

"The Minster presses are very reliable. When we put a certain tonnage job in a Minster press, we know we don’t have to de-rate the press. We know that the press can handle it."

“The Minster presses are very versatile. You can set, cut and form in the same press, while in some other makes of presses, you can’t.”

“I heard about Minster presses and now that I have experienced depending on them; I realize their reputation is well deserved.”

„Keine Frage. Bei einer Presskraft ab 60 Tonnen ist Minster die erste Wahl für uns. Dies gilt für die Technologie, die Langlebigkeit und den langfristigen Nutzen“.

“The longevity of the presses is really the most impressive feature. Most of the Minster presses you see in our plant are 20 and 30 years-old and they are still running 20 hours a day.”

“We run our critical parts on the Minster presses. Minster’s repeatability is better than other presses. The Minster presses simply make better parts.”

“I’m a firm believer in having the people who originally built the press remanufacture it, if possible. That way I get the proper prints, the right engineering and proper controls. Minster has the people on board to get the job done right.”

“It’s easy to set up and the operators love it. In fact, they want me to put Minster equipment on all the press line because of how well that one works.”

“You can get smaller presses that run the same speed and have the same tonnage, but I see an overwhelming difference in the Minster’s because of the mass. The Minster Presses consistently out-perform their competitors.”

“Compared to other presses, when you add the repeatability, the tolerances and the service capabilities offered, your uptime is clearly better with a Minster Press.”

“We don’t want to have to worry about the press, and that’s what keeps us coming back to Minster. When you have a Minster, 99 percent of the problem is going to be somewhere else, not the press.”

“The dependability of the Minster press is very important to us. We’ve got anywhere from 24 to 48 hours to set up and run a part, and if we’ve got a problem, we’re in trouble, and we’ve never had any problems with the Minsters.”

“It’s been a remarkable utility press. It’s so handy, we’ve stuck about everything on there and it does a good job.”

“The parts coming off the Minster presses and J.V. Tooling are a straight flat part and we really see some benefits from that. We are consistently getting a better part, and I think that is a function of the press as well as the tooling.”

“We know we can get a 24-hour turnaround on replacement parts. And if there is a problem, the service personnel respond instantly to maximize production uptime.”