Robotised and hand-operated press lines
They are intended to deform large workpieces. They usually comprise four or five presses, arranged in line and fed by shuttles or robots that carry the pieces of pre-cut material, or blanks.
Nidec ARISA manufactures independent press lines, with a blank feeder at the head and robots for shuttling pieces between presses.
Dual S-Line Press – NEW!
Sometimes, the total length of the set of dies for making a part exceeds the maximum dimension of the press’ bed. For these cases, Arisa provides lines consisting of two transfer presses synchronised in speed and equipped with an inter-transfer device so that both machines may work simultaneously on the same workpiece or independently on different pieces.
The rated forces inside single-acting and double-acting main presses range from 12,500kN to 25,000kN. In the case of in-line presses, these forces can range from 5,000kN to 12,500kN.
There are different bed and slide dimensions for each group of pieces. The forces of the presses can also be adjusted to the production process.
Dual S-Line – NEW!
A single feed system with multiple servo presses efficiently working with some of the most demanding materials and dies. The Dual S-Line offers the presses to work in unison or independently
Tandem G1-G2
Interconnected presses working together for large parts manufacturing with different kinematic technologies: servo press, link drive or slider crank.
Tailored Press Lines
The flexible option that meets customer needs whatever they are. Multiple press sizes and kinematics available in a completely integrated system.